| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 189218 | Electrochimica Acta | 2011 | 8 Pages |
The optimum Pt and Ru atomic composition of a carbon-supported Pt–Ru alloy (Pt–Ru/C) used in a practical direct methanol fuel cell (DMFC) anode was investigated. The samples were prepared by the polygonal barrel-sputtering method. Based on the physical properties of the prepared Pt–Ru/C samples, the Pt–Ru alloy was found to be deposited on a carbon support. The microscopic characterization showed that the deposited alloy forms nanoparticles, of which the atomic ratios of Pt and Ru (Pt:Ru ratios) are uniform and are in accordance with the overall Pt:Ru ratios of the samples. The formation of the Pt–Ru alloy is also supported by the electrochemical characterization. Based on these results, methanol oxidation on the Pt–Ru/C samples was measured by cyclic voltammetry and chronoamperometry. The results indicated that the methanol oxidation activities of the prepared samples depended on the Pt:Ru ratios, of which the optimum Pt:Ru ratio is 58:42 at.% at 25 °C and 50:50 at.% at 40 and 60 °C. This temperature dependence of the optimum Pt:Ru ratio is well explained by the relationship between the methanol oxidation reaction process and the temperature, which is reflected in the rate-determining steps considered from the activation energies. It should be noted that at 25–60 °C, the Pt–Ru/C with Pt:Ru = 50:50 at.% prepared by our sputtering method has the higher methanol oxidation activity than that of a commercially available sample with the identical overall Pt:Ru ratio. Consequently, the polygonal barrel-sputtering method is useful to prepare the practical DMFC anode catalysts with the high methanol oxidation activity.
► The sputtered Pt and Ru form the Pt–Ru alloy nanoparticles on the carbon support. ► The deposited Pt–Ru alloy particles have uniform Pt:Ru atomic ratios. ► The optimum Pt:Ru ratio of the Pt–Ru/C for methanol oxidation is 58:42 at.% at 25 °C. ► The optimum Pt:Ru ratio of 58:42 shifts to 50:50 at.% at 40 and 60 °C. ► The polygonal barrel-sputtering method is useful to prepare the DMFC anode catalyst.
