Article ID Journal Published Year Pages File Type
189359 Electrochimica Acta 2012 6 Pages PDF
Abstract

Ion-selective microelectrodes can be employed as tips in scanning electrochemical microscopy (SECM) for chemical imaging of corrosion processes. They present higher chemical selectivity than conventional amperometric microdisks, and may be the only effective option to visualize the dissolution of metals with negative redox potentials in aqueous environments when the use of Pt microelectrodes is limited by the onset of oxygen reduction and hydrogen evolution reactions. A robust micro-sized ion selective electrode has been developed which allows the spatial distribution of Zn2+ during galvanic corrosion of a model Fe/Zn couple to be investigated using SECM. Owing to the low internal contact potential achieved with the novel design, the resistance of the micropipette electrodes is only fractions of the resistance of conventional micropipette electrodes of the same size. As a result, no special shielding of the microelectrodes is required and higher scanning rate can be used for scanning in the potentiometric modes using these micropipette tips. Concentration profiles over corroding surfaces measured with this technique will be presented.

Graphical abstractFigure optionsDownload full-size imageDownload as PowerPoint slideHighlights► A robust micro-sized Zn2+ ion selective electrode for potentiometric SECM has been developed. ► The resistance of the micropipette electrode is only fractions than in conventional ones. ► Concentration profiles over corroding surfaces are measured with this technique.

Related Topics
Physical Sciences and Engineering Chemical Engineering Chemical Engineering (General)
Authors
, , , , , ,