| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 190298 | Electrochimica Acta | 2011 | 7 Pages |
The effects of different configurations and compositions of platinum and iridium oxide electrodes for the oxygen reaction of unitised regenerative fuel cells (URFC) are reported. Bifunctional oxygen electrodes are important for URFC development because favourable properties for the fuel cell and the electrolysis modes must be combined into a single electrode. The bifunctional electrodes were studied under different combinations of catalyst mixtures, multilayer arrangements and segmented configurations with single catalyst areas. Distinct electrochemical behaviour was observed for both modes and can be explained on the basis of impedance spectroscopy. The mixture of both catalysts performs best for the present stage of electrode development. Also, the multilayer electrodes yielded good results with the potential for optimisation. The influence of ionic and electronic resistances on the relative performance is demonstrated. However, penalties due to cross currents in the heterogeneous electrodes were identified and explained by comparing the performance curves with electrodes composed of a single catalyst. Potential improvements for the different compositions are discussed.
Research highlights► Different oxygen electrode configurations for the operation in a unitised reversible fuel cell were tested. ► Polarisation curves and EIS measurements were recorded. ► The mixture of catalysts performs best for the present stage of electrode development. ► Potential improvements for the different compositions are discussed.
