Impedance studies of cathode/electrolyte behaviour in SOFC

This paper reports impedance studies of the cathode/electrolyte behaviour in solid oxide fuel cells (SOFC), based on comparative investigation of half-cells with yttria stabilized zirconia (YSZ) electrolyte and different cathode materials: lanthanum strontium manganite (LSM), and composite LSM/YSZ with low ionic conductivity as well as the electron conducting Ag, Pt and Au. For improved impedance data analysis the technique of the differential impedance analysis is applied. It ensures structural and parametric identification without preliminary assumptions about the working model. It is found that despite the low ionic conductivity of LSM, the cathode reaction of the oxide cathode materials is a two-step process including: (i) charge transfer with activation energy of the resistivity Ea increasing with the temperature and (ii) transport of oxygen ions through the bulk of the electrode (rate-limiting stage) with Ea independent on the temperature. For the metal (electron conducting) electrodes, the reaction behaviour is described with one step process with higher Ea at higher temperatures. The activation energy of the electrolyte conductivity decreases with the increase of the temperature. The observed changes in Ea for the electrolyte and the cathode reaction (the charge transfer step for the LSM-based electrodes) appear in the same temperature interval. This interesting coincidence suggests for correlation between the bulk (electrolyte) and surface conduction properties. Approaches for improvement of both the ionic conductivity and the supply with electrons in LSM should be also searched.