Solubility and Henry's law constant of sulfur dioxide in aqueous polyethylene glycol 300 solution at different temperatures and pressures

•Gas–liquid equilibrium data of PEG 300 + water at (298.15–318.15) K and (110.34–142.03) kPa.•Henry's law constants were fitted based on the GLE data.•Enthalpy and entropy were calculated using the GLE data at different temperature.

In this work, isothermal gas–liquid equilibrium (GLE) data are reported for the system of SO2 + N2 + polyethylene glycol (PEG) 300 + water (H2O) at five different reaction temperatures (from 298.15 to 318.15 K) and different pressures (from 110.34 to 142.03 kPa) with SO2 partial pressures in the range of 0 to 180 Pa. Measurements were carried out by a saturation method using a glass absorption apparatus, which was controlled at constant temperatures by a thermostatic circulation bath with a Beckmann thermometer. The GLE data were obtained with uncertainties within ±0.02 K for temperature, ±0.1 kPa for total pressures, and ±0.05 for SO2 concentration in the gas phase and ±0.003 for SO2 concentration in the liquid phase. The measurements showed that the solubility of dilute SO2 in the system of PEG (1) + water (2) increased the with increasing PEG concentration in the mass fraction range of w1 = (0.50–1.00). The solubility of SO2 in the system of PEG (1) + water (2) presented an extreme minimum at the mass fraction of w1 = 0.50 of 152.3 g m−3 when SO2 in the gas phase was designed at ySO2=5×10−4ySO2=5×10−4. The solubility of dilute SO2 in the system of PEG (1) + water (2) increased with decreasing PEG concentration in the mass fraction range of w1 = (0.05–0.50). The solubility of SO2 in the system of PEG (1) + water (2) presented an extreme minimum at the mass fraction of w1 = 0.05 of 270.7 g m−3 when SO2 in the gas phase was designated at ySO2=5×10−4ySO2=5×10−4. Henry's law constants were fitted with a dynamic system based on the GLE data. Using the solubility data, the partial molar thermodynamic functions of solution, enthalpy and entropy, were calculated. Conclusions drawn from this work may be used to provide important GLE data for the design and operation of the absorption and desorption processes of PEG solutions in flue gas desulfurization.