Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
205709 | Fuel | 2015 | 8 Pages |
•53 peat samples were characterised for their lignocellulosic composition.•Klason lignin was the main constituent; maximum total sugars content was 28%.•Near infrared (NIR) spectroscopy was developed as a rapid means of analysis.•NIR analysis was usually more accurate on dry samples than on wet ones.•Models suitable for quantitative analysis were developed for wet and dry samples.
Analytical data and quantitative near infrared (NIR) spectroscopy models for various lignocellulosic components (including Klason lignin and the constituent sugars glucose, xylose, mannose, arabinose, galactose, and rhamnose), moisture, and ash were obtained for 53 peat samples. These included samples with high, medium, and low degrees of humification. Klason lignin was the main constituent and was greatest in the samples classified as being highly humified, with structural sugars the lowest in this class. The total sugars contents of all samples were considered to be insufficient to allow for their use in biorefining hydrolysis processes for the production of chemicals and biofuels. NIR models were developed for spectral datasets obtained from the samples in their unprocessed (wet), dry and unground, and dry and ground states. Typically the most accurate models were based on the spectra of dry and ground samples. However the NIR models for the wet samples still offered reasonable predictive capabilities. All models were suitable at least for sample screening, with the models for total sugars, glucose, xylose, galactose, and moisture suitable for quantitative analyses.