An Eulerian modeling approach of wood gasification in a bubbling fluidized bed reactor using char as bed material

We present an Eulerian multiphase approach for modeling the gasification of wood in fluidized beds. The kinetic theory of granular material is used to evaluate constitutive properties of the dispersed solid phase. Comprehensive models for wood pyrolysis, char gasification and homogeneous gas phase reactions are taken into account. The dispersed solid phase within the reactor is modeled as three continuous phases, i.e., one phase representing wood and two char phases with different diameters. In contrast to most other studies we investigate a fluidized bed which consists of wood and char particles without additional inert particles such as limestone or olivine. 2D simulation results for a lab-scale bubbling fluidized bed reactor are presented and compared with experimental data for product gas and tar concentrations and temperature. We investigate the influence of two different classes of parameters on product gas concentrations and temperature: (i) operating conditions such as initial bed height, wood feeding rate, and reactor throughput and (ii) model parameters like thermal boundary conditions, primary pyrolysis kinetics, and secondary pyrolysis model. Two different pyrolysis models are implemented and are compared against each other. The numerical results indicate (i) a relatively low influence of the investigated operating conditions on the main product gas components, (ii) a high sensitivity of main product gas components CO and CO2 on the thermal boundary condition, and (iii) a very strong influence of operating conditions and model parameters on the tar content in the product gas.