| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 210492 | Fuel Processing Technology | 2012 | 6 Pages |
It is necessary to utilize waste cooking oil as a raw material of biodiesel because the land area available for cultivation in Japan is limited. Waste cooking oil also includes long-chain saturated compounds and free fatty acids derived from animal fats. The former has a high freezing point and the latter forms a soap with the alkali catalyst typically used in biodiesel production, reducing the yield. To make waste cooking oil available for biodiesel production, pyrolysis of the waste oil was attempted. The resulting triacylglycerols were found to decompose at 360 to 390 °C, fatty acids were generated by cleavage of the ester bond, and short-chain hydrocarbons and short-chain fatty acids were generated by cleavage of the unsaturated bonds in the hydrocarbon chain. When the retention time was extended with a reaction temperature of 420 °C, light-oil hydrocarbons were generated by decarboxylation of the fatty acids. By adding palladium supported by activated carbon (Pd/C) as a catalyst, decarboxylation was promoted, and hydrocarbons comparable to light oil were selectively obtained in high yield at 85 wt.%. Compared to the biodiesel obtained by transesterification, the biodiesel obtained by pyrolysis showed improvement of about − 5 °C in the pseudo-cold filter plugging point.
► Biodiesel production by the pyrolysis of animal-derived fats was investigated. ► In the pyrolysis of fat and oil, TGs are decomposed to FAs. ► At 420 °C, HCs are formed by decarboxylation of ester groups. ► The addition of Pd/C to the pyrolysis improves the selectivity of light oil. ► The present pyrolysis method is suitable for processing waste cooking oil.
