Article ID Journal Published Year Pages File Type
219286 Journal of Electroanalytical Chemistry 2012 7 Pages PDF
Abstract

Oriented rutile TiO2 nanoarrays on transparent conductive fluorine-doped tin oxide (FTO) substrates were prepared by a facile hydrothermal synthesis. A three-dimensional (3D) nanostructured TiO2–Ni(OH)2 composite film was further constructed by a novel electrochemical procedure using the obtained TiO2 nanorod array as substrate. A photosensitized electrolytic oxidation phenomenon was observed for the as-prepared TiO2–Ni(OH)2 composite film electrode under UV irradiation. It was found that the photosensitized electrolytic oxidation of Ni(OH)2 exhibited a much lower rate than the corresponding electrochemical oxidation. The as-prepared 3D nanostructured TiO2–Ni(OH)2 composite film electrode, coupled with platinum, showed excellent UV-induced oxidative energy storage ability, and the apparent quantum yield was as high as 10.6%. The nanostructured composite film electrode still delivered a discharge capacity of 5.45 mC cm−2 after 45 irradiation–discharge cycles, manifesting the good reversibility of the UV-induced oxidative energy storage and conversion. It was concluded that the enhanced UV-induced oxidative energy storage of the TiO2–Ni(OH)2 composite film can be ascribed to its unique nanostructured characteristics.

Graphical abstractThe as-constructed three-dimensional nanoporous TiO2–Ni(OH)2 composite film, coupled with platinum, shows excellent UV-induced oxidative energy storage ability, and the corresponding energy storage and conversion is significantly reversible.Figure optionsDownload full-size imageDownload as PowerPoint slideHighlights► A 3D nanoporous TiO2–Ni(OH)2 composite film is constructed by a novel method. ► The TiO2–Ni(OH)2 composite film shows excellent oxidative energy storage ability. ► The UV-induced oxidative energy storage and conversion is reversible. ► A photosensitized electrolytic oxidation phenomenon of Ni(OH)2 is observed. ► The results are beneficial to extending the use of photocatalysts in the dark.

Related Topics
Physical Sciences and Engineering Chemical Engineering Chemical Engineering (General)
Authors
, , , , , , , , , ,