Article ID Journal Published Year Pages File Type
221601 Journal of Environmental Chemical Engineering 2016 10 Pages PDF
Abstract

•Removal of simvastatin by electrochemical oxidation process was investigated.•The profile of separation and identification of by-products was presented well.•Chlorinated by-products were detected and elucidated.•TOF/MS approves that it has a high accuracy to extract the by-products with 0.02 Da.•Toxicity of simvastatin was evaluated before and after treatment.

As far as we know, the electrochemical degradation of simvastatin, a widely used as a cholesterol lowering drug, has not been reported yet. The oxidation process has been investigated in pure water and wastewater using graphite-Poly Vinyl Chloride (PVC) composite electrode as anode. Effects of initial concentration of simvastatin, NaCl loading, type of sample and applied voltage were tested to evaluate the electrochemical oxidation process. The results revealed that the electrochemical oxidation rates of simvastatin followed pseudo first-order kinetics, with rate constant values ranged from 0.006–0.23 min−1 depending on the operating parameters. Simvastatin was completely removed, after 40 min of treatment, at 4 g/L NaCl and 10 V indicating high concentration of OCl− produced in the solution but at the same time energy consumption (EC) was very high. However, 6 V was selected for further experiments (90% removal and 0.093 Wh/mg energy consumption) after 40 min. The low concentration of simvastatin (30 mg/L) exhibited better removal of 97% compared to 50 mg/L which gives removal 90% after 40 min. In this work the electrochemical oxidation process of simvastatin has been studied by monitoring the by-products and their toxicity using the time–of–flight (TOF/MS) technology. Chlorinated by-products were separated and identified accurately using isotope modern software. Simvastatin was transformed within 20–80 min, however, after 100 min most of by-products have been removed. Eleven new by-products of simvastatin were identified and monitored in both positive and negative ionization mode.

Graphical abstractFigure optionsDownload full-size imageDownload as PowerPoint slide

Related Topics
Physical Sciences and Engineering Chemical Engineering Chemical Engineering (General)
Authors
, , , ,