Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
226126 | Journal of Food Engineering | 2008 | 10 Pages |
The methodology of dynamic optimal experimental design was applied to estimate the thermal conductivity and the volumetric heat capacity of conduction heated foods simultaneously. For this purpose, a hotwire probe was used to generate heat in the thermal center of a food product. The temperature response was measured at a specified location inside the food. In order to minimize the effect of experimental input errors on the estimates, the information content of the measured temperature profiles was maximized. Optimal (dynamic) heat generation profiles as well as an optimal location to measure the temperature response in the food product were computed based on modern global optimization algorithms. These heating profiles were implemented and it was shown that the methodology guarantees an optimal regime for simultaneous parameter estimation. Pulse heating with two peaks – one at the beginning and one at the end of the experiment – was found to be an optimal heating profile. The optimal measurement position was located at some distance from, and close to, the heating probe. The mathematical and numerical outcomes of the applied methodology were interpreted in a physical context.Validation experiments with a food simulator (Tylose) were done, and coefficients of variation of 4% and 2% were obtained for the thermal conductivity and volumetric heat capacity, respectively.