| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 236024 | Powder Technology | 2014 | 7 Pages |
•Entecavir 0.5 mg-loaded tablet was prepared by direct compression method.•Serial preblending with sieving improved content uniformity.•Micronized drug and optimized composition gave the best content uniformity.•The method from lab-scale study was confirmed in the pilot-scale production.
The aim of the present research was to develop direct compression entecavir 0.5 mg-loaded tablet (DCET) providing enhanced content uniformity. Various compositions and preblending methods were tested at lab-scale, and the optimum composition and method were applied to pilot-scale production for further confirmation of the entire process. The content uniformity, physical properties and dissolution behavior of the final film-coated DCET were compared to the commercial product. In lab-scale preparation, the method involving preblending, micronization of API (d0.5 = 5.13 μm), addition of a larger quantity of colloidal silicon dioxide (1%) and sieving through smaller pores (300 μm) yielded an excellent acceptance value (AV) in the content uniformity criteria compared to a control method and composition (AV 1.0 vs. 9.8). In pilot-scale production, the film-coated DCET provided better content uniformity than the commercial product (AV 1.3 vs. 3.8). Furthermore, both products exhibited similar dissolution profiles in various media. Thus, direct compression entecavir 0.5 mg-loaded tablet developed in this study would be a promising dosage form with excellent content uniformity that may be bioequivalent to the commercial product.
Graphical abstractFigure optionsDownload full-size imageDownload as PowerPoint slide
