Numerical analysis of mixed convection heat transfer of Al2O3-water nanofluid in a ventilated cavity considering different positions of the outlet port

•Mixed convection in a square ventilated cavity is investigated.•Theoretical models are used to simulate presence of nanoparticles.•Nusselt number and pressure drop coefficient increase with increase of Re, Ri and φ.

A numerical study of mixed convection flow and heat transfer inside a square cavity with inlet and outlet ports is performed. Given a fixed position of the inlet port, the location of the outlet port is varied along the four walls of the cavity in order to determine the best configuration of the system corresponding to maximum heat transfer rate and minimum pressure drop. The presence of nanoparticles in the base fluid are simulated using theoretical models. It is observed that the average Nusselt number is an increasing function of Reynolds number, Richardson number and nanoparticle volume fraction. The pressure drop coefficient is also increased in the presence of nanoparticles. Moreover the performance of the nanoparticle utilization on the enhancement of heat transfer at higher Richardson numbers is less than that at lower Richardson numbers.

Graphical abstractFigure optionsDownload full-size imageDownload as PowerPoint slide