| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 237019 | Powder Technology | 2012 | 7 Pages |
The rheological characteristics for the complex hydro-mixture of coal combustion products (CCPs) such as fly ash and fly ash-bottom ash mixture slurry at high solids concentration in the range of 60–70% by weight were investigated. Based on the rheological data, a non-Newtonian pseudo-plastic power law head loss model was used to evaluate the head loss of ash slurry pipelines having nominal bores in the range of 100–300 mm. The results indicated that the addition of bottom ash fractions to fly ash slurry at a given solids concentration has a beneficial effect in reducing the pumping power requirement. A monogram (design chart) for the ash mixture slurry has been formulated indicating the variation of backfilling rate WS with H/L ratio for a range of pipe sizes and transport velocities which may provide relevant pipe flow and operational conditions for hydraulic disposal of these coal combustion products for mine backfilling purpose.
Graphical abstractBased on the rheological behavior of ash slurry, the pipe flow characteristics for a range of pipelines have been evaluated using a non-Newtonian power law head loss model. A monogram (design chart) for the ash mixture slurry has been formulated indicating the variation of backfilling rate WS with H/L ratio for a range of pipe sizes and transport velocities. The said chart may be quite helpful in providing relevant pipe flow and operational conditions for hydraulic disposal of these coal combustion products at higher solids concentrations for mine backfilling purpose.Monogram (Design chart) indicating mine backfilling rate (WS) vs. H/L ratio for a range of pipelines and flow velocities, CW = 65%, Bottom ash fraction = 0.2Figure optionsDownload full-size imageDownload as PowerPoint slideHighlights► The hydro-mixture was characterized by pseudo-plastic power law model. ► The head loss of ash slurry was evaluated using a power law head loss model. ► Addition of bottom ash fractions has a beneficial effect in reducing the pump power. ► A monogram (design chart) for backfill transport with CCPs has been formulated. ► The chart may provide relevant design parameters for mine backfilling with CCPs.
