| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 237111 | Powder Technology | 2012 | 4 Pages |
We report on the use of a modified multimode microwave cavity to sinter commercially available p-type (Bi0.2Sb0.8)2Te3 powder. We have designed a special crucible containing SiC barrels to perform hybrid heating of the samples. Two different initial relative densities were studied (74 and 84%). The morphological evolution of the microstructure was studied by field emission scanning electron microscopy (FESEM). We have also observed that the densification of such powder is possible but that the final relative density reaches an upper limit of 86% due to the formation of Te gas, which results in closed porosity. The Seebeck coefficient was found to be independent of the process. The highest measured power factor is 2.9 × 10− 3 W K− 2 m− 1.
Graphical abstractA commercially available p-type(Bi0.2Sb0.8)2Te3 powder was sintered, using a modified multimode microwave cavity. Despite the formation of Te gas, the final density can reach 86% which results in closed porosity. The Seebeck coefficient was found to be independent of the process. The highest measured power factor is 2.9 × 10− 3 WK− 2m− 1.Figure optionsDownload full-size imageDownload as PowerPoint slideHighlights► Commercial p-type (Bi0.2Sb0.8)2Te3 powder has been sintered with microwaves. ► Final relative density was found to reach an upper limit because of Te gaseous formation. ► The Seebeck coefficient appears to be almost constant for sintered materials.
