| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 238836 | Powder Technology | 2008 | 16 Pages |
The friction effect in filling and unsteady/steady discharge of three-dimensional wedge-shaped hopper was considered numerically by the discrete element method. The presented model is based on contact mechanics of a single spherical particle involving Hooke's law of spring interaction, static and dynamic friction as well as viscous damping forces. The hopper filling process en masse was performed while the modeling of uncontrolled and controlled discharge was simulated. The evolution of the kinetic energy of filling, the distribution of stresses within granular material and stresses acting on the walls, as well as the change in fields of material porosity were investigated at the stages of filling and discharge of the hopper. The variation of flow velocities, the discharged mass fractions as well as discharge fraction rates were analyzed. The friction effect was analyzed by varying inter-particle friction coefficient over the range of 0–0.6. A comparison of the numerical results with available continuum-based predictions was also presented.
Graphical abstractInter-particle friction not only affects macroscopic behavior of granular material during filling and discharge but also exhibits various local effects. Figure shows simulated velocity field of frictional particles (μ = 0.3) in a mid-plane of the wedged-shaped hopper during filling. Here, local motion of particles is characterized by vortex-like patterns.Figure optionsDownload full-size imageDownload as PowerPoint slide
