Article ID Journal Published Year Pages File Type
238918 Powder Technology 2008 9 Pages PDF
Abstract

Wet granulation and drying of solids in fluidized beds are widely used in the pharmaceutical, food and fertilizers industries. Although the moisture content of fluidized solids is the key parameter for on-line process monitoring, reliable, accurate and economical moisture sensors are lacking. The aim of this work was, therefore, to develop a new technique using triboelectric probes for real-time measurement of moisture content in fluidized beds, and to validate its applicability to fluid bed drying of glass beads (Sauter-mean diameter of 171 μm) and silica sand particles (Sauter-mean diameter of 190 μm) wetted by water. Several triboelectric probes, installed at different locations throughout the bed, monitored the bed moisture content during both the liquid spraying and the following drying process. The measuring technique developed in this study makes use of inexpensive probes that do not require any maintenance. The triboelectric signals were continuously recorded by a data acquisition system and, at selected times, samples of bed solids were taken and analyzed for their moisture content using Karl Fischer titration. The triboelectric signals were correlated with the moisture contents determined by titration to calibrate the technique, which was found to be sensitive to moisture contents below 100 ppm. For most of the experiments the bed was operated in the bubbling regime with a superficial gas velocity of 0.4 m/s. The relationship between triboelectric signal and moisture content was unaffected by changes in the fluidization gas velocity of up to 25%, and could be easily automated for direct control of industrial granulation and drying processes.

Graphical abstractAlthough the moisture content of fluidized solids is a key parameter for on-line process monitoring of fluidized bed dryers, reliable, accurate and economical moisture sensors are lacking. A new technique using triboelectric probes provides real-time measurement of moisture content in fluidized beds, as shown in the figure.Figure optionsDownload full-size imageDownload as PowerPoint slide

Related Topics
Physical Sciences and Engineering Chemical Engineering Chemical Engineering (General)
Authors
, , ,