| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 239003 | Powder Technology | 2008 | 9 Pages |
A method is described to independently estimate the solids velocity and voidage in the moving bed portion of the NETL circulating fluidized bed (CFB). These quantities are used by a device that continuously measures the solids circulation rate. The device is based on the use of a rotating Spiral vane installed in the standpipe of a circulating fluid bed (CFB). Correlations were developed from transient experiments and steady state mass balance data to correct the solids velocity and solids fraction in the standpipe as a function of standpipe aeration rate. A set of statistically-designed experiments was used to establish the need for these corrections and to verify the accuracy of solid circulation rate measurements after correction. The differences between the original and corrected measurements were quantitatively compared.
Graphical abstractA method is described to independently estimate the solids velocity and voidage in the moving bed portion of the NETL circulating fluidized bed (CFB). These quantities are used to correct the solids circulation rate measurements reported by a device that continuously measure the solids circulation rate. The differences between the original and corrected circulation rate measurements were quantitatively compared.Figure optionsDownload full-size imageDownload as PowerPoint slide
