Numerical modeling of particle fluidization behavior in a rotating fluidized bed

In this study, numerical modeling of particle fluidization behaviors in a rotating fluidized bed (RFB) was conducted. The proposed numerical model was based on a DEM (Discrete Element Method)-CFD (Computational Fluid Dynamics) coupling model. Fluid motion was calculated two-dimensionally by solving the local averaged basic equations. Particle motion was calculated two-dimensionally by the DEM. Calculation of fluid motion by the CFD and particle motion by the DEM were simultaneously conducted in the present model. Geldart group B particles (diameter and particle density were 0.5 mm and 918 kg/m3, respectively) were used for both calculation and experiment. First of all, visualization of particle fluidization behaviors in a RFB was conducted. The calculated particle fluidization behaviors by our proposed numerical model, such as the formation, growth and eruption of bubble and particle circulation, showed good agreement with the actual fluidization behaviors, which were observed by a high-speed video camera. The estimated results of the minimum fluidization velocity (Umf) and the bed pressure drop at fluidization condition (ΔPf) by our proposed model and other available analytical models in literatures were also compared with the experimental results. It was found that our proposed model based on the DEM-CFD coupling model could predict the Umf and ΔPf with a high accuracy because our model precisely considered the local downward gravitational effect, while the other analytical models overpredicted the ΔPf due to ignoring the gravitational effect.

Graphical abstractFigure optionsDownload full-size imageDownload as PowerPoint slideNumerical modeling of particle fluidization behaviors in a rotating fluidized bed (RFB) was conducted by DEM-CFD coupling model. It was found that our proposed model could predict the Umf and ΔPf with a high accuracy because it could precisely take into account the local downward gravitational effect.