| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 240657 | Proceedings of the Combustion Institute | 2011 | 9 Pages |
In this study, the atomization characteristics of Diesel jet front tip have been investigated to elucidate the physical mechanisms by detailed numerical simulation. The computations are carried out with the finest grid resolutions ever that can resolve the final droplet generation by surface tension. The numerical methods are based on level-set interface tracking. The methods were validated by test cases and the grid resolution survey shows that the resolutions for the present study are sufficient. The present flow setup excludes nozzle disturbances to investigate how the disturbances from the liquid jet front would lead to atomization where the liquid jet impacts against the quiescent gas. The liquid jet front becomes an umbrella-like shape. From the front umbrella tip edge, ligament breakup first occurs. Ligament breakup is strongly correlated with the gas motion in the vicinity. The gas region behind the front is highly disturbed by atomization. By the gas recirculation motion here, air and some droplets are entrained and mixed. Also, the disturbances are fed back to the front umbrella by this motion and become synchronized with the breakup. Droplet pinch-off is mainly in the short-wave mode, but some ligaments are elongated by local gas stretch to finally have a long-wave mode shape, namely a mode shift occurs. The above findings of liquid jet front umbrella formation, atomization at the umbrella edge, mixing and atomization loop in the recirculation flow region and droplet generation mode give an insight to the modeling of droplet generation in actual sprays.
