Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
240984 | Proceedings of the Combustion Institute | 2005 | 8 Pages |
A large-scale duct with an explosion suppressor was designed to investigate experimentally the explosion suppression by inert particles for a CH4/O2/N2 mixture. The duct is 25 m long and has an internal diameter of 700 mm. Pressure and flame signals were recorded some distance away from ignitor in the duct. Pressure tracking lines of the shock front for the different inert particle cloud densities and the inert particle diameters were made. The measured results indicate that the shock front is decoupled from the flame front in the inert particle cloud, which leads to a suppression of explosion. Also, the experiments suggest that increasing the inert particle cloud density or decreasing the inert particle diameter can enhance the ability to suppress explosion. For the purpose of validation, a two-dimensional numerical model coupled with the element chemical reaction mechanism for the simulations of the CH4/O2/N2 mixture explosion suppression by the inert particles has been developed. This model makes use of the second-order TVD scheme and the MacCormack scheme to calculate gas-phase and particle-phase equations, respectively. The Strang splitting technique is used to treat the stiffness due to the coupling of the governing equations, while the implicit Gear algorithm is used to treat the stiffness due to the chemical reactions. The effect of inert particle cloud density on explosion suppression was investigated using the model. The calculated results indicate that the accumulation of inert particles slows the propagation of the gas-phase shock front and results in explosion suppression. With increased inert particle cloud density, the explosion suppression is more prominent. The calculated results show a qualitative agreement with the measured results in the large-scale duct experiment.