Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
241043 | Proceedings of the Combustion Institute | 2009 | 8 Pages |
To examine the pyrophoric characteristics of Mg powder, we generated ultra-fine Mg particles (average particle diameter: about 0.3 μm) without an original oxide coat in an Ar stream. The ignition of the powder was measured by using the impinging O2/N2 mixture streams over a wide range of the experimental parameters: pressure, oxygen concentration and velocity of the streams. The Mg powder was found to ignite even at room temperature. The spontaneous ignition temperatures in the range of 278 ∼ 324 K were insensitive to all the experimental parameters. The ignition delay time had a tendency to decrease with increasing experimental parameters.The ignition process of the Mg powder was found to be controlled by the surface reaction rate without an oxide coat. We proposed a new ignition hypothesis considering a critical oxide thickness on the Mg powder particles at the transition temperature from protective to non-protective nature: that is, the ignition of the Mg powder occurs when the powder temperature rises above the transition temperature before surface reactions form a protective oxide coat with the critical thickness on the individual particle surfaces. According to this hypothesis, an ignition model of Mg powder cluster was developed, and the relation between the spontaneous critical ignition temperature and the ultra-fine powder size, depending on the critical thickness of the protective oxide coat, was clarified. The critical oxide thickness was estimated.