| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 249028 | Building and Environment | 2010 | 8 Pages |
Formaldehyde and volatile organic compounds (VOCs) from the adhesive, flooring, and flooring with adhesive were measured using a desiccator, a 20-L chamber and a field and laboratory emission cell (FLEC). Flooring with an adhesive is similar to that used in construction was applied to a floor heating system and an air circulation system, and the surface temperature of the flooring was set to 20 °C, 26 °C and 32 °C. The rate of formaldehyde emission from the flooring was the highest at 32 °C using a desiccator and decreased with time. The formaldehyde and aldehyde emissions from the samples using a 20-L chamber and FLEC showed a similar tendency. The VOCs emission trends with the 20-L chamber and FLEC were similar. The rate of formaldehyde and TVOC emission determined using FLEC was higher than that determined using the 20-L chamber method. The flooring emitted primarily benzene, toluene, ethylbenzene, styrene, xylene, as well as some unknown VOCs. There was a strong correlation between formaldehyde and TVOC emission for the 20-L chamber and FLEC. Samples using a floor heating system showed higher formaldehyde emission than those using an air circulation system. The level of TVOC emission was higher from the samples using an air circulation system than those using the floor heating system.
