GBT formulation to analyse the buckling behaviour of FRP composite open-section thin-walled columns

This paper presents a Generalised Beam Theory (GBT) formulation to analyse the local and global buckling behaviour of FRP (fibre-reinforced polymer) composite thin-walled columns with arbitrary open cross-sections, which takes into account both shear deformation and cross-section deformation effects. After describing the steps and procedures involved in performing the GBT cross-section analysis of an arbitrarily branched composite (laminate plate) thin-walled member, the paper addresses the numerical implementation of the proposed GBT formulation, carried out by means of the finite element method (GBT-based beam element) – particular attention is devoted to the derivation of the element linear and geometric stiffness matrices, which incorporate all the material coupling effects. In order to illustrate the application and capabilities of the proposed formulation and implementation, several numerical results are presented and discussed, dealing with the local and global buckling behaviour of FRP composite I-section columns with different ply orientations and stacking sequences. Taking advantage of the GBT modal features, deep insight is acquired on the complex composite member buckling mechanics, namely those involving bending–torsion or global–local coupling effects. In particular, one investigates the influence of (i) the constitutive assumption regarding the transverse extension occurring in the cross-section composite walls and (ii) the distribution of pre-buckling normal stresses (due to axial compression) on the buckling behaviour of I-section columns. For validation purposes, the above results are compared with values recently reported in the literature and estimates obtained from shell finite element analyses.