An analytical model for perforation of ceramic/multi-layered planar woven fabric targets by blunt projectiles

An analytical model has been developed in this paper for perforation of ceramic/multi-layer woven fabric targets by blunt projectiles. In previous Chocron–Galvez analytical model the semi-angle of ceramic conoid is constant and the strain rate effects are also neglected in the stress–strain behavior of the yarns and only strain energy absorbed by the yarns is considered.In this paper which is an improvement to the Chocron–Galvez analytical model for modeling the fragmented ceramic conoid, the Zaera–Sanchez-Galvez analytical model has been used and the semi-angle of ceramic conoid has been modified. For modeling the back-up woven-fabric material and deformation of yarns during perforation, the kinetic and strain energy of yarns has been determined. In the stress–strain relation of yarns, the effect of the strain rate is considered. Furthermore, a failure model based on the energy absorbed until failure by woven fabric is also used. Residual velocity, velocity–time history of projectile, residual mass of fragmented ceramic conoid, penetration depth until failure of yarns and energy absorbed by woven fabric are all estimated by new analytical model. Velocity–time history of the projectile shows a good agreement with the Chocron–Galvez numerical model. Also, near the ballistic limit velocity, prediction of residual velocity of new model is better than Chocron–Galvez analytical model.