Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
256551 | Construction and Building Materials | 2015 | 11 Pages |
•New design approach is proposed for controlling brittle failure modes of CLT connections.•Effect of cross layers is included in a model already validated in LVL and glulam.•Cross layers in CLT contribute in such a way providing a wider and deeper connection.•Verification is performed using timber rivet joints loaded parallel to grain.•Proposed design approach can be extended to other fasteners such as nails and screws.
The introduction of Cross-laminated Timber (CLT) as an engineered timber product has played a significant role in considerable progress of timber construction in recent years. Extensive research has been conducted in Europe and more recently in Canada to evaluate the fastening capacity of different types of fasteners in CLT. While ductile capacities calculated using the yield limit equations are quite reliable for fastener resistance in connections, however, they do not take into account the possible brittle failure mode of the connection which could be the governing failure mode in multi-fastener joints. Therefore, a stiffness-based design approach which has already been developed by the authors and verified in LVL, glulam and lumber has been adapted to determine the block-tear out resistance of connections in CLT by considering the effect of perpendicular layers. The comparison between the test results on riveted connections conducted at the University of Auckland (UoA) and the Karlsruhe Institute of Technology (KIT) and the predictions using the new model and the one developed for uniformly layered timber products show that the proposed model provides higher predictive accuracy and can be used as a design provision to control the brittle failure of wood in CLT connections.