| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 256702 | Construction and Building Materials | 2015 | 9 Pages |
•An experimental study was performed for producing new lightweight concretes.•Density and compressive strength decreased, and insulation properties improved.•The reductions in thermal conductivity and diffusivity reached to 82% and 74%.
In this study, experimental investigation is performed for producing new cement-based with relatively high strength, low density and good thermal properties for energy efficient buildings. Different types of concretes containing silica fume (SF), superplasticizer (SP) and air-entrained admixtures are prepared with a constant water–cement ratio, and normal aggregates replaced by lightweight aggregates (LWAs) including pumice (PA), expanded perlite (EPA) and rubber aggregates (RA) at different volume fractions of 10%, 20%, 30%, 40% and 50%. 102 samples with different materials and compositions are produced, and their characteristics are tested in accordance with ASTM and EN standards. Based on the experimental results, equations are presented to determine the relation between the thermophysical properties of composite samples. The investigation revealed that the addition of PA, EPA and RA reduced the material bulk density and compressive strength, and improved the insulation characteristics of the composite concretes. Furthermore, it was found out that the reductions in thermal conductivity and diffusivity of the produced samples reached to 82% and 74%, respectively.
