| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 259147 | Construction and Building Materials | 2012 | 9 Pages |
In this work, the evaluation of the longitudinal modulus of elasticity (EL) of maritime pine (Pinus pinaster Ait.) was investigated by means of compression tests parallel to the grain. Strain data was collected by digital image correlation (DIC) and compared with results from glued strain gauges. The DIC method provided similar results compared to the strain gauge measurements, but with reduced scatter due to higher gauge area, making the technique less sensitive to the wood heterogeneity (earlywood and latewood layers). The influence of the specimen parasitic end-effects (i.e., friction and damage) on the apparent modulus of elasticity was further investigated by testing specimens with different cross-sections and lengths. The apparent modulus of elasticity is underestimated for increasing specimen cross-sections and decreasing specimen lengths. Friction has a negligible effect on apparent modulus of elasticity, while the extension of the damaged contact zone is the governing phenomenon.
► Longitudinal modulus of maritime pine wood is assessed using the DIC technique ► Compression tests parallel to grain are used with different specimen sizes ► DIC results are compared with alternative strain gauge measurements ► Influence of friction and contact damage on apparent modulus is discussed ► FEM and analytical models are used to address friction and contact damage effects
