Concrete cover effect on reinforced concrete bars exposed to high temperatures

The mechanical properties of structural reinforcement steel have been investigated after the exposure to high temperatures. Plain steel, reinforcing steel bars embedded into mortar and plain mortar specimens were prepared and exposed to 20, 100, 200, 300, 500, 800 and 950 °C temperature for 3 h individually. The S420 deformed steel bars with diameters of ∅10, ∅16 and ∅20 were used. The mortar was prepared with CEM I 42.5 N cement and fly ash. The tension tests on reinforcements taken from cooled specimens were performed, and the variations in yield strength, ultimate strength and in resilience of three different dimensioned reinforcements were determined. A cover of 25 mm provides protection against high temperatures up to 400 °C. The high temperature exposed plain steel and the steel with 25-mm cover has the same characteristics when the reinforcing steel is exposed to a temperature 250 °C above the exposure temperature of plain steel.