| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 263569 | Energy and Buildings | 2013 | 13 Pages |
The scope of this work was to investigate the summer ventilation performance of three high thermal inertia solar thermosyphonic configurations, used as night natural ventilation systems. The aim was to assess the effectiveness of each configuration and orientation on night natural ventilation. Three designs, (a) SC1 a conventional SC, (b) SC2 a thermal chimney with duct attached behind the absorber, and (c) SC3 a thermal chimney rectangular duct with two surfaces glazed. Thermal performance of each SC was investigated by simulations in EnergyPlus followed by a Sensitivity Analysis performed on predicted results. For calibration and validation, output variables were checked and verified for coherence against published experimental data of similar nature found in literature. Analysis disclosed SC2 facing West the most effective design. Simulation results showed that a concrete thermal chimney 3 m tall with 0.1 m wall thickness and 0.2 m air gap exhibited night cooling capacity, depending on configuration and orientation, was found ranging from 3.27 MJ/m-day for the SC1 faced South, up to 10.0 MJ/m-day and 14.7 MJ/m-day for the SC3 and SC2 facing West, respectively. SC2 faced West was predicted to deliver flow rate 98% higher than the flow rate of a same size conventional SC1 faced South.
► Night thermal performance of three heavy built solar chimney types was investigated. ► Type and orientation with best summer night cooling performance was looked for. ► Solar chimneys facing W with the air-duct attached behind absorber works best. ► Thermal chimney type SC2 faced W gives night flow-rate twice as good than conventional type SC1. ► Neither the type nor the way solar chimneys are used so far is the best for providing night cooling.
