Development and experimental validation of a simulation model for open joint ventilated façades

The investigation of the thermal and fluid dynamical behaviour of open joint ventilated façades is a challenging task due to the complex airflows generated inside of the naturally ventilated cavity by the existence of open joints. For this reason, the use of advanced fluid measurement and simulation techniques is highly recommended. This paper focuses in the development and experimental validation of a simulation model for these façade systems. More specifically, different turbulence and radiation models available in the commercial computational fluid dynamic codes have been tested on a three-dimensional model and the results have been compared to particle image velocimetry measurements. The correlation between experimental and numerical data has been used in order to select the simulation procedure for this type of façades. Best fittings have been found when using the RNG k-epsilon turbulence model and the Discrete Ordinate radiation model. Using the selected scheme, parametrical simulations have been performed to investigate the effect of increasing the cavity height, and correspondingly, the number of slabs. Results show that ventilation air flow inside the cavity is enhanced by incident radiation as well as by the height of the façade.

► Use of advanced fluid measurement (PIV) and simulation (CFD) techniques. ► Performance and limitations of different turbulence and radiation models is analysed. ► Detailed information of the flow structures inside the air cavity are presented and discussed. ► Data will serve as benchmark to validate other models.