Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
269944 | Fire Safety Journal | 2012 | 20 Pages |
Fire safety of buildings has been recognised as very important by the building industry and the community at large. Traditionally, increased fire rating is provided by simply adding more plasterboards to light gauge steel frame (LSF) walls, which is inefficient. Many research studies have been undertaken to investigate the thermal behaviour of traditional LSF stud wall systems under standard fire conditions. However, no research has been undertaken on the thermal behaviour of LSF stud walls using the recently proposed composite panel. Extensive fire testing of both non-load bearing and load bearing wall panels was conducted in this research based on the standard time-temperature curve in AS1530.4. Three groups of LSF wall specimens were tested with no insulation, cavity insulation and the new composite panel based on an external insulation layer between plasterboards. This paper presents the details of this experimental study into the thermal performance of non-load bearing walls lined with various configurations of plasterboard and insulation. Extensive descriptive and numerical results of the tested non-load bearing wall panels given in this paper provide a thorough understanding of their thermal behaviour, and valuable time-temperature data that can be used to validate numerical models. Test results showed that the innovative composite stud wall systems outperformed the traditional stud wall systems in terms of their thermal performance, giving a much higher fire rating.
► A composite plasterboard panel with an external insulation layer is proposed for use in LSF walls. ► Thermal behaviour of plasterboards and composite panels was investigated under standard fire. ► Effects of using plasterboards and insulations with varying thicknesses and densities were studied. ► The new composite panel showed superior thermal performance. ► Developed valuable time-temperature data that can be used in validating thermal numerical models.