Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
270020 | Fire Safety Journal | 2012 | 13 Pages |
This paper reports the results of experiments performed in a 1 m3 chamber on suppression of n-heptane pool fires using fine water-mist (DV50∼23 μm) generated from air aspirating twin fluid nozzles in continuous and pulsed mode. The effect of pulsing duration (1.0–1.4 s ON/0–1.3 s OFF), fire size (5–12.5 kW) and pre-burn duration (10–30 s) was studied for air and nitrogen as the atomizing fluid. During these experiments, fire suppression time, quantity of water for suppression and temperatures in the chamber were recorded. Fire suppression performance index (FSPI) was developed as an indicative measure of fire suppression effectiveness. It was observed that the best FSPI was achieved for a pulsing cycle of 1.3 s ON and 1 s OFF. Nitrogen as atomizing medium for mist generation was found to be more effective for fire suppression by 30–50%. Increase in pre-burn duration and fire size was found to reduce suppression time due to larger heat available in the chamber. Fire suppression for larger fire size was achieved with 25–30% of the combustion heat absorbed by the mist, indicating important contribution to fire suppression by other processes such as oxygen dilution and inerting due to water vapour.
► Pool fire suppression experiments in 1 m3 chamber with 23 μm mist, generation rate 3.75 g/s. ► Mist in continuous & pulsed mode using air/ N2 on three fire sizes and pre-burn durations. ► Higher pre-burn duration & fire size reduces suppression time and water qty required. ► Pulsing cycle of 1.3 s ON/1 s OFF shows higher fire suppression effectiveness in all cases. ► Using Nitrogen as atomizing media reduced fire suppression time by 30–50%.