Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
271631 | Fusion Engineering and Design | 2014 | 8 Pages |
•Real-time tools and mechanisms are required for data handling and machine control.•A new DAQ system, ATCA based, with embedded FPGAs, was installed at JET.•Different real-time algorithms were developed for FPGAs and MARTe application.•MARTe provides the interface to CODAS and to the JET real-time network.•The new DAQ system is capable to process and deliver data in real-time.
The steady state operation with high energy content foreseen for future generation of fusion devices will necessarily demand dedicated real-time tools and mechanisms for data handling and machine control. Consequently, the real-time systems for those devices should be carefully selected and their capabilities previously established. The Joint European Torus (JET) is undertaking an enhancement program, which includes tests of relevant real-time tools for the International Thermonuclear Experimental Reactor (ITER), a key experiment for future fusion devices. In these enhancements a new Data AcQuisition (DAQ) system is included, with real-time processing capabilities, for the JET hard X-ray and gamma-ray profile monitor. The DAQ system is composed of dedicated digitizer modules with embedded Field Programmable Gate Array (FPGA) devices. The interface between the DAQ system, the JET control and data acquisition system and the JET real-time data network is provided by the Multithreaded Application Real-Time executor (MARTe). This paper describes the real-time algorithms, developed for both digitizers’ FPGAs and MARTe application, capable of meeting the DAQ real-time requirements. The new DAQ system, including the embedded real-time features, was commissioned during the 2012 experiments. Results achieved with these real-time algorithms during experiments are presented.