Evaluation of interface shear strength of composite liner system and stability analysis for a landfill lining system in Thailand

The paper presents the case history of laboratory evaluation of the interface shear strength properties of various interfaces encountered in a modern day landfill with emphasis on proper simulation of field conditions and subsequent use of these results in the stability analyses of liner system. Over 70 large direct shear tests were systematically conducted to evaluate the interface shear strength properties of composite liner system using project specific materials under site specific conditions, being used at non-hazardous and hazardous landfills project situated in Sa Kaeo Province, Thailand. The critical interfaces were located between the geotextiles and the smooth geomembrane (GM), the smooth GM and the geosynthetic clay liner (GCL), and the smooth GM liner and the compacted clay liner (CCL) with the interface friction angles ranging from 6.5° to 10.5° for dry conditions and 6.5° to 9.5° in wet conditions. The residual shear stress for these interfaces was attained at a displacement less than 4 mm. Three methods, namely, limit equilibrium method (LEM), limit method (LM), and the simple composite column (SCC) approach were used to evaluate the tensile loads induced in the geosynthetic components. The SCC approach proposed by Liu, C.N. [2001. Tension of geosynthetics material regarding soils on landfill liner slopes. Proceedings, National Science Council ROC(A), 25(4), 211–218] that takes into account the force equilibrium as well as displacement compatibility yielded satisfactory results. The factor of safety for geosynthetic components in the liner was found to be greater than 3.0 for both types of landfill.