Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
275154 | International Journal of Mining Science and Technology | 2015 | 6 Pages |
A theoretical basis for the optimization of carbon dioxide injection parameters and the development of the drainage system can be provided by identifying the permeability change characteristic of coal and rock after injection of carbon dioxide into the coal seam. Sihe, Yuwu, and Changcun mines were used as research sites. Scanning electron microscopy and permeability instruments were used to measure coal properties such as permeability and surface structure of the coal samples at different pH values of carbon dioxide solution and over different timescales. The results show that the reaction between minerals in coal and carbonate solution exhibit positive and negative aspects of permeability-the dissolution reaction between carbonate minerals in coal and acid solution improves the conductivity of coal whilst, on the other hand, the clay minerals in the coal (mainly including montmorillonite, illite and kaolinite) exhibit expansion as a result of ion exchange with the H+ in acid solution, which has a negative effect on the permeability of the coal. The permeability of coal samples increased at first and then decreased with immersion time, and when the soaking time is 2–3 months the permeability of the coal reached a maximum. In general, for coals with permeabilities less than 0.2 mD or greater than 2 mD, the effect on the permeability is low; when the permeability of the coal is in the range 0.2–2 mD, the effect on the permeability is highest. Research into permeability change characteristics can provide a theoretical basis for carbon dioxide injection under different reservoir permeability conditions and subsequent drainage.