Article ID Journal Published Year Pages File Type
280391 International Journal of Solids and Structures 2005 15 Pages PDF
Abstract

The curvature effects of interlayer van der Waals (vdW) forces on axially compressed buckling of a double-walled carbon nanotube (DWNT) of diameter down to 0.7 nm are studied. Unlike most existing models which assume that the interlayer vdW pressure at a point between the inner and outer tubes depends merely on the change of the interlayer spacing at that point, the present model considers the dependence of the interlayer vdW pressure on the change of the curvatures of the inner and outer tubes at that point. A simple expression is derived for the curvature-dependence of the interlayer vdW pressure in which the curvature coefficient is determined. Based on this model, an explicit formula is obtained for the axial buckling strain. It is shown that neglecting the curvature effect alone leads to an under-estimate of the critical buckling strain with a relative error up to −7%, while taking the average radius of two tubes as the representative radius and the curvature effect leads to an over-estimate of the critical buckling strain with a relative error up to 20% when the inner radius downs to 0.35 nm. Therefore, the curvature effects play a significant role in axially compressed buckling problems only for DWNTs of very small radii. In addition, our results show that the effect of the vdW interaction pressure prior to buckling of DWNTs under pure axial stress is small enough and can be negligible whether the vdW interaction curvature effects are neglected or not.

Related Topics
Physical Sciences and Engineering Engineering Civil and Structural Engineering
Authors
, , ,