Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
285129 | Journal of Constructional Steel Research | 2012 | 15 Pages |
Special Concentrically Braced Frames are commonly used as the seismic resisting system in buildings. Their inherent strength and stiffness assure serviceable performance during smaller, more frequent earthquakes. Inelastic tensile yield and post-buckling compressive deformations of the brace dominate performance during large seismic events. However, inelastic deformations of the brace place secondary yet significant inelastic deformation demands on beams, columns, and connections, which significantly affect the seismic performance. These response modes must be included in an analytical model of the system to capture the response. However, conventional practice uses beam–column elements for the brace, to simulate brace buckling, with pin-ended or rigid end connections; these computer models cannot capture the full range of SCBF behaviors. The research presented in this paper was undertaken to develop a modeling approach for SCBFs to more accurately predict their seismic performance. Beam–column elements are used for the braces, beams and columns and these elements include nonlinear geometric effects to simulate brace buckling. A new connection model is proposed to simulate the behavior of the gusset plate. The model parameters are based upon the member sizes, properties and connection designs. Simulated results are compared with experimental results and predictions from approaches more commonly used in practice. Although a step beyond models currently used in design practice, the proposed model remains simple in its implementation and is suitable for a wide range of practical applications. The proposed model provides accurate simulation of global behavior, while retaining simplicity and providing reasonable predictions for many local behaviors.
► A nonlinear modeling approach of SCBFs was proposed. ► Proposed model was validated by a great number of experiments. ► A new connection model is proposed to simulate the behavior of the gusset plate. ► The model is accurate yet practical computational model for SCBFs.