Vibration testing based on impulse response excited by pulsed-laser ablation: Measurement of frequency response function with detection-free input

We have developed a non-contact vibration-measurement system that is based on impulse excitation by laser ablation (i.e. laser excitation) to measure the high-frequency-vibration characteristics of objects. The proposed method makes it possible to analyse the frequency response function just by measuring the output (acceleration response) of a test object excited by pulsed-laser ablation. This technique does not require detection of the input force. Firstly, using a rigid block, the pulsed-laser-ablation force is calibrated via Newton's second law. Secondly, an experiment is conducted in which an object whose natural frequency lies in the high-frequency domain is excited by pulsed-laser ablation. The complex frequency spectrum obtained by Fourier transform of the measured response is then divided by the estimated pulsed-laser-ablation force. Finally, because of the error involved in the trigger position of the response with respect to the impulse arrival time, the phase of the complex Fourier transform is modified by accounting for the response dead time. The result is the frequency response function of the object. The effectiveness of the proposed method is demonstrated by a vibration test of an aluminium block.

Graphical abstractFigure optionsDownload full-size imageDownload as PowerPoint slideHighlights► Laser excitation achieves a point excitation with high reproducible and reliability. ► A method for compensating force characteristics by non-contact laser excitation is studied. ► Frequency response function is measured by the proposed method with detection-free input.