| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 296996 | Nuclear Engineering and Design | 2012 | 10 Pages |
The Gas Test Loop (GTL)-1 irradiation experiment was conducted in the Advanced Test Reactor (ATR) to assess corrosion performance of proposed booster fuel at heat flux levels ∼30% above the design operating condition. Sixteen miniplates fabricated from 25% enriched, high-density (4.8 g U/cm3) U3Si2/Al dispersion fuel with 6061 aluminum cladding were subjected to peak beginning of cycle (BOC) heat fluxes ranging from 411 to 593 W/cm2. No adverse impacts to the miniplates were observed at these high heat flux levels. A detailed finite element model was constructed to calculate temperatures and heat flux for an as-run cycle average effective ATR south lobe power of 25.4 MW(t). Miniplate heat flux levels and fuel, cladding, hydroxide, and coolant–hydroxide interface temperatures were calculated using the average hydroxide thickness on each miniplate measured during post-irradiation examination. The purpose of this study was to obtain a best estimate of the as-run experiment temperatures to aid in establishing acceptable heat flux levels and designing fuel qualification experiments for this fuel type.
Graphical abstractFigure optionsDownload full-size imageDownload as PowerPoint slideHighlights► Best estimate of thermal conditions during irradiation experiment. ► Thermal evaluation of 25% enriched, high-density U3Si2/Al dispersion fuel miniplates. ► Predictions of heat flux and temperature for as-run, high heat flux conditions. ► Finite-element analysis uses measured values of hydroxide layer thickness.
