An endothermic chemical process facility coupled to a high temperature reactor. Part I: Proposed accident scenarios within the chemical plant

Hydrogen generation using a high temperature nuclear reactor as a thermal driving vector is a promising future option for energy carrier production. In this scheme, the heat from the nuclear reactor drives an endothermic water-splitting plant, via coupling, through an intermediate heat exchanger. Quantitative study of the possible operational or accident events within the coupled plant is largely absent from the literature. In this paper, seven unique case studies are proposed based on a thorough review of possible events. The case studies are: (1) feed flow failure from one section of the chemical plant to another with an accompanying parametric study of the temperature in an individual reaction chamber, (2) product flow failure (recycle) within the chemical plant, (3) rupture or explosion within the chemical plant, (4) nuclear reactor helium inlet overcooling due to a process holding tank failure, (5) helium inlet overcooling as an anticipated transient without emergency nuclear reactor shutdown, (6) total failure of the chemical plant, (7) control rod insertion in the nuclear reactor. The qualitative parameters of each case study are outlined as well as the basis in literature. A previously published modeling scheme is described and adapted for application as a simulation platform for these transient events. The results of the quantitative case studies are described within part II of this paper.

► The paper identifies possible transient and accident scenarios in a coupled PBMR and thermochemical sulfur cycle based hydrogen plant. ► Key accidents scenarios were investigated through qualitative reasoning. ► The accidents were found to constitute loss of heat sink event for the nuclear reactor.