Post-test calculation and uncertainty analysis of the experiment QUENCH-07 with the system code ATHLET-CD

In the frame of developmental assessment and code validation, a post-test calculation of the test QUENCH-07 was performed with ATHLET-CD. The system code ATHLET-CD is being developed for best-estimate simulation of accidents with core degradation and for evaluation of accident management procedures. It applies the detailed models of the thermal-hydraulic code ATHLET in an efficient coupling with dedicated models for core degradation and fission products behaviour. The first step of the work was the simulation of the test QUENCH-07 applying the modelling options recommended in the code User's Manual (reference calculation). The global results of this calculation showed a good agreement with the measured data. This calculation was complemented by a sensitivity analysis in order to investigate the influence of a combined variation of code input parameters on the simulation of the main phenomena observed experimentally. Results of this sensitivity analysis indicate that the main experimental measurements lay within the uncertainty range of the corresponding calculated values. Among the main contributors to the uncertainty of code results are the heat transfer coefficient due to forced convection to superheated steam–argon mixture, the thermal conductivity of the shroud isolation and the external heater rod resistance. Uncertainties on modelling of B4C oxidation do not affect significantly the total calculated hydrogen release rates.