Site response in Tecoman, Colima, Mexico—I: Comparison of results from different instruments and analysis techniques

This paper presents a study of site effects in the urban area of Tecoman in Colima, Mexico. A variety of instruments (both accelerometers and seismometers) were used to record earthquakes and ambient vibration throughout the city. Earthquake records were analysed using several techniques to estimate site effects: spectral ratios relative to a reference station, spectral ratios of the horizontal components relative to the vertical recorded at the same site, and a parametric inversion of Fourier spectra. Ambient noise records were used to estimate a local transfer function using horizontal to vertical spectral ratios. The results show that local amplification at Tecoman is significant. Dominant frequency varies between 0.5 and 0.7 Hz, suggesting a large thickness of the soft sedimentary deposits. We did not observe systematic variations throughout the city. Our more reliable estimates indicate that maximum amplification is comprised between a factor 6 and 8. Comparisons among different sensors and recorders show that all combinations between velocimeters, accelerometers, and recorders provide reliable results provided that the electronic noise is smaller than the noise being recorded. This is notably not the case for accelerometers at quiet sites and for frequencies smaller than 2 Hz. This explains why previous studies disagree as to the usefulness of accelerometers to record ambient noise for site effect studies. This factor is, however, a function of noise amplitude at each site.