Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
309210 | Thin-Walled Structures | 2013 | 9 Pages |
Material degradation due to corrosion significantly alters the seismic response of ground-based cylindrical steel storage tanks. A numerical study is conducted to investigate the effects of internal shell corrosion on the dynamic buckling of three cone roof ground-based, steel cylindrical tanks with height to diameter ratios (H/D) of 0.40, 0.63 and 0.95, subjected to horizontal seismic base excitations. Internal corrosion is considered as a time dependent uniform thinning of the wall at the upper and the lower parts of the tank being in contact with, respectively, atmospheric oxygen and acid gases and residual water. Detailed numerical models of the tank–liquid systems at different stages of corrosion degradation are subjected to two representing accelerograms and for each model the critical peak ground acceleration (PGA) for dynamic buckling of the shell and its associated mode of failure are evaluated. It is found that in all three tanks, the critical PGA is markedly reduced with thinning of the shell, irrespective of the type of ground input. The buckling mode of failure of the tanks also changed from an elastic diamond-shaped failure at the top of the shell to an elasto-plastic elephant foot type failure near the base, after 10 years for the shorter tanks (H/D=0.4 and 0.63) and after 15 years for the tallest tank. The effects of uniform corrosion degradation on the critical buckling load of the tanks were found to be such that after 20 years of thinning due to corrosion, the static loading alone was responsible for the elephant foot buckling of the shell.
► Effects of internal shell corrosion on dynamic buckling of steel tanks are investigated. ► Critical PGA is markedly reduced with thinning of the shell. ► Static loading alone can cause elephant foot buckling after excessive corrosion.