| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 309625 | Thin-Walled Structures | 2010 | 10 Pages |
The ultimate resistance of a continuous composite beam is governed by either distortional lateral buckling or local buckling, or an interactive mode of the two which is sharply different from the torsional buckling mode in a bare steel beam. A finite element model is developed and based on the proposed FE model, inelastic finite element analysis of composite beams in negative bending is investigated, considering the initial geometric imperfection and the residual stress patterns and the FE results are found agree well with the test results. Parametrical analysis is carried out on the prestressed composite beams with external tendons in negative bending. Factors that influence load carrying performance and buckling moment resistance of prestressed composite beams are analyzed, such as initial geometric imperfection, residual stress in steel beams, force ratio, which is defined as the extent of prestressing force and negative reinforcement in the beams, as well as the slenderness ratios of web, flange, and beams. By varying cross-section parameters, 25 groups of composite beams under negative uniform bending with initial geometric imperfection, residual stress as well as different force ratios, 200 beams in total are studied by means of the FE method. The computed buckling moment ratios are drawn against the modified slenderness proposed by the authors and compared with the Chinese Codified steel column design curve. It is demonstrated that the tentative design method based on the Chinese Codified design curve can be used in assessment of buckling strength of composite beams in a term of the modified slenderness defined.
