Platelet preservation: Agitation and containers

For platelets to maintain their in vitro quality and in vivo effectiveness, they need to be stored at room temperature with gentle agitation in gas-permeable containers. The mode of agitation affects the quality of the platelets, and a gentle method of agitation, either a circular or a flat bed movement, provides the best results. Tumblers or elliptical agitators induce platelet activation and subsequent damage. As long as the platelets remain in suspension, the agitation speed is not important. Agitation of the platelet concentrates ensures that the platelets are continuously oxygenated, that sufficient oxygen can enter the storage container and that excess carbon dioxide can be expelled. During transportation of platelet concentrates, nowadays over long distances where they are held without controlled agitation, platelets may tolerate a certain period without agitation. However, evidence is accumulating that during the time without agitation, local hypoxia surrounding the platelets may induce irreversible harm to the platelets.Over the decades, more gas-permeable plastics have been used to manufacture platelet containers. The use of different plastics and their influence on the platelet quality both in vitro and in vivo is discussed. The improved gas-permeability has allowed the extension of platelet storage from 3 days in the early 1980s, to currently at least 7 days. In the light of new developments, particularly the introduction of pathogen reduction techniques, the use of platelet additive solutions and the availability of improved automated separators, further (renewed) research in this area is warranted.