Effect of Posterolateral Bundle Graft Fixation Angles on Graft Tension Curves and Load Sharing in Double-Bundle Anterior Cruciate Ligament Reconstruction Using a Transtibial Drilling Technique

PurposeTo evaluate the effect of posterolateral bundle (PLB) graft fixation angles on graft tension curves and load sharing between the anteromedial bundle (AMB) and the PLB in double-bundle anterior cruciate ligament (ACL) reconstruction.MethodsTwenty-four patients who underwent double-bundle ACL reconstruction were included in this study. AMB and PLB were provisionally fixed to a graft tensioning system during surgery. The graft fixation settings were as follows: (1) AMB at 20° and PLB at 0° (A20P0), (2) AMB at 20° and PLB at 20° (A20P20), and (3) AMB at 20° and PLB at 45° (A20P45). Bundle tension was recorded during knee flexion-extension and in response to anterior or rotatory loads. A pivot-shift test, as well as factors affecting the residual pivot-shift, was also evaluated.ResultsA20P45 created reciprocal tension curves and load sharing, in which the tension in both bundles was equivalent during flexion-extension and during each loading test at 30°. In A20P0, the tension of the AMB was constantly higher than that of the PLB. Seven patients showed grade 1 pivot-shift phenomenon in A20P0, whereas no patient showed a positive pivot-shift at other settings. Larger tension reduction of the PLB between 0° and 30° and smaller load sharing of the PLB were significant factors affecting residual pivot-shift.ConclusionsIn double-bundle ACL reconstruction, fixation of the AMB at 20° and the PLB at 45° created reciprocal tension curves and load sharing between the bundles. Fixation of the AMB at 20° and the PLB at 0° led to insufficient tension in the PLB, resulting in a residual pivot-shift phenomenon in 7 of 24 patients.Level of EvidenceLevel IV, therapeutic case series.