Stress Relaxation and Creep: Viscoelastic Properties of Common Suture Materials Used for Flexor Tendon Repair

PurposeThe time-dependent mechanical behavior of common suture materials may have a pronounced influence on the quality of flexor tendon repairs with respect to gap formation.MethodsSutures commonly used in plastic surgery, particularly for hand tendon repair, were tested in tension for analysis of stress relaxation and creep properties. The three materials tested were (1) Prolene, a monofilament polypropylene(Ethicon, Somerville, NJ); (2) Ethilon, a monofilament nylon(Ethicon, Somerville, NJ); and (3) Ticron, a braided polyester fiber (Sherwood, Davis & Geck, St. Louis, MO). All measurements were made with 1.5-mm (4-0) varieties of the sutures, in physiological buffered solution (0.9% phosphate-buffered saline [PBS]) at both room (22°C) and body temperature (37°C) conditions.ResultsTicron was the stiffest suture at both room and body temperature, followed by Prolene and Ethilon. Both Prolene and Ethilon showed statistically (p < .05) reduced stiffness at body temperature. Prolene exhibited statistically larger (p < .05) relaxation and creep ratios than the other two sutures, and it was the only material to show temperature effects in creep and relaxation.ConclusionsBased on static and viscoelastic mechanical properties, Ticron is the most suitable suture for flexor tendon repairs when compared to Prolene and Ethilon.