Rotator cuff tears: association with acromion angulation on MRI

ObjectiveUsing magnetic resonance imaging (MRI), evaluate the correlation of acromion angulation with thickening of the coracoacromial ligament (CAL) and narrowing of the subacromial space resulting in impingement upon the rotator cuff tendons.Materials and methodsEighty-nine shoulder MRI studies performed on a 3T scanner were retrospectively analyzed by two blinded independent reviewers. Measurements of the acromion angle (delta angle), CAL thickness and distance between the CAL and humeral head were obtained. The data were categorized into two groups, delta angle less that and greater than 7.5°. The presence or absence of full thickness (FT) or near full thickness (NFT) rotator cuff tears was noted.ResultsIn group 1, the acromion angle varied from -6.8 to 6.8° (1.7±3.5°) with a CAL thickness of 0.91±0.20 mm and a subacromial distance of 6.47±0.88 mm. Group 2 acromion angle varied from 7.6° to 46.8° (18.0°±8.1°) with a CAL of 1.77±0.51 mm and a subacromial distance of 4.52±0.82 mm. The difference in CAL thickness and subacromial distance were significantly different between the two groups (P<.001). In Group 1, 3 out of 51 patients had a FT or NFT tear of the rotator cuff compared to 20 out of 38 in Group 2 (P<.001). There was no significant interobserver variability.ConclusionSteep acromion angulation is associated with CAL thickening and narrowing of the subacromial space. Patients with a steep acromion angle had a statistically increased incidence of rotator cuff tears.