Article ID Journal Published Year Pages File Type
43270 Applied Catalysis A: General 2008 7 Pages PDF
Abstract

Sodium-tungsten-manganese (Na-W-Mn)-supported SiO2 catalyst is one of the widely studied catalysts in oxidative coupling of methane (OCM) reaction. Na, W and Mn have individual roles during the OCM reaction, in providing the stability and activity of the catalyst system. The interaction effects of the component–component and component–support on the methane conversion and C2+ yield were investigated with the aid of thermal gravimetric analysis (TGA), X-ray diffraction (XRD), Raman spectroscopy, Fourier transformed infrared (FTIR) spectroscopy, nitrogen adsorption analysis and catalytic activity tests. The catalyst performance was studied at an operating temperature of 850 °C, a gas hourly space velocity (GHSV) of 23,947 cm3/g h, a catalyst pretreatment period of 2 h, a dilution ratio of 0.2, and a CH4/O2 ratio of 7. During the stability test, methane conversion was maintained at 40–50% throughout a 30 h run. The catalyst was regenerated by allowing oxygen flow through the catalyst bed for 3–5 h once the catalyst was deactivated. C2+ selectivity was recovered to almost 60%, whereas methane conversion did not change after the regeneration. Both Na2WO4 and Mn2O3 crystalline phases contributed to achieving high selectivity of C2+ products. The catalyst activity dropped due to the phase transformation of the support from α-cristobalite to quartz and the loss of manganese oxide from the catalyst surface.

Graphical abstractSodium-tungsten-manganese (Na-W-Mn)-supported SiO2 catalyst has been studied for the production of ethylene in a OCM reaction. Na, W and Mn play important roles during the OCM reaction, in providing the stability and activity of the catalyst system. The interaction effects of the component–component and component–support on the methane conversion and C2+ yield are reported using different characterization techniques.Figure optionsDownload full-size imageDownload as PowerPoint slide

Related Topics
Physical Sciences and Engineering Chemical Engineering Catalysis
Authors
, , ,